Mobil™ Solutions Proof of Product Performance
The proof behind energy-saving and cost-cutting Mobil Industrial Lubricants.
Mobil SHC Chain 240 increases lubrication interval and overall performance
A global automotive manufacturer was looking for an alternative chain lubricant that had better price and lead times – They not only benefitted from this, but also realised our chain lubricant offered increased re-lubrication intervals, and improved system efficiency.

Benefits from switching over biogas engine to our higher performance gas engine oil and coolant
DB Agri’s MAN biogas engine benefits from extending their ODI (Oil Drain Interval) and keeping the engine’s Oxidation below the condemning limit. Additionally, the previous coolant’s drain period has been extended by 50%.

Moove Bulk Oil Storage Solution Reduces Plastic Waste
UK Formula 1 constructor saves over £700/year on the cost of buying oil in larger pack sizes and, more importantly, reduced over 500kg/year in plastic waste!

Mobil Centaur XHP™ 462 reduces bearing replacement rate in sugar & ethanol plant filter presses to zero
When Mobil Centaur XHP 462 was used for two consecutive seasons, NO bearings failed during the season, and the off-season inspection resulted in 100% reuse of the bearings as the signs of oxidation and/or corrosion were no longer observed.

Mobil Centaur XHP™ 462 reduces bearing failure rate, increases diffuser efficiency, and provides greater safety for workers
After the application of Mobil Centaur XHP 462 grease over the next 4 seasons, there was a 56% reduction in theses bearings’ service failure rate, with a direct positive impact on the efficiency of the diffuser and on the safety of workers, as the bearing changes reduced human-machine interventions by 488 hours.

Mobilith SHC™ 460 eliminates the need for human intervention on the bagasse belt bearings for two consecutive seasons
With the continuous use of Mobilith SHC 460 in 10 bagasse belt bearings for two consecutive seasons without any lubricant intervention, 160 human-machine interventions were avoided over the period with zero bearing failures and verification, using predictive techniques, that the grease reached the end of two seasons in perfect condition and with the ability to effectively protect bearings.

Mobilith SHC™ 460 eliminates the need for human intervention on the bagasse belt bearings
After continuous use of Mobilith SHC™ 460 in 124 cane bagasse belt bearings without any lubrication intervention throughout an entire season, 992 human-machine interactions were avoided during the belt’s operating period with zero bearing failures and a check using predictive techniques that the grease reached the end of the season in perfect condition and able to effectively protect the bearings.

Mobiltemp SHC™ 100 doubles the lubrication interval and increases boiler reliability in sugar-ethanol plants
Mobiltemp SHC™ 100 grease doubled the bearing lubrication interval and reduced the envelope vibration spectrum, which had peaked at 22.8 gE, to values below 1.5 gE. In addition to the increased bearing reliability, the Mobiltemp SHC™ 100 eliminated 96 human-machine interactions in the bearing lubrication task in just one season.

Mobil SHC 629 oil helps Cement Mill save over £40,000 per year
After changing to Mobil SHC 629 synthetic gear and bearing oil, a cement mill experienced an immediate increase in plant productivity due to reliable and consistent mixer operation at start-up and product discharge phase whilst saving 7.5 hours running time per week by eliminating the need to heat the previous mineral oil up to running temperature. An annual saving of £40,555 was reported by the company in relation to the Mobil SHC 629 change.

Thames Water UK demonstrates potential savings of almost £200,000 during the oil life of Mobil SHC 600 Series
In an independently monitored four-week trial, the spinner aerators operating on Mobil SHC 600 Series showed a reduced power consumption averaging 0.65% over the previous lubricant. This equated to a potential saving of £196,964 during the five year oil life, as well as significant reductions in CO2 emissions.

Landfill gas energy customer demonstrates potential annual savings of over £45,000 in productivity, and almost a 38,000L reduction in oil usage
After completing a seven-month trial using Mobil Pegasus 605 Ultra 40, there was a 176% extension in the oil drain interval. This equated to a potential annual saving of £45,086 across all landfill gas engines, a reduction of 37,872L waste oil, and 126 hours less in operator maintenance.

Mobil Solutions for the Oil and Gas Industry: Extend the service life of machine components and reduce oil changes
By using our Mobil industrial lubricants and state-of–the-art expert technical services, Oil & Gas customers can extend the life of their assets, improve equipment reliability and enhance their lubrication practices.

Thames Water UK demonstrates potential savings of £375,000 per year by using Mobil DTE 10 Excel
In a closely monitored seven-month trial, the aeration blowers operating on Mobil DTE 10 Excel showed a reduced power consumption of up to 3.13% over the previous lubricant. This equated to a potential saving of £375,000.00 per annum as well as a significant reduction is CO2 emissions.
